WORX 20V Power Share 5-in-1 Multi-Sander
New power tool combines multiple uses into one cordless sander.
WORX has introduced the new 20V Power Share 5-in-1 Sandeck Multi-Sander, combines multiple sanders into one, including a 5-inch random orbit sander, ¼ sheet finishing sander, detail sander, detail finger and detail contour attachments.
What makes this Multi-Sander unique is its exclusive power transmission design with Mode Max Technology.
Mode Max Technology’s power transfer is specific to the sanding task at hand. Each pad has a unique interface designed to maximize efficiency, resulting in zero application compromise.
Typical multi sanders can lose performance in other modes. When the 5-inc random orbit sanding pad is attached, the sanding action makes small ellipses where no two orbits are the same during rotation, leaving a smooth, swirl-free finish. The multi-sander’s orbital diameter is 3/32 in.
When switching to a ¼ sheet finishing sanding pad, the Multi-Sander ranges from 4000 to 10,000 orbits per minute (opm, no-load) for aggressive sanding (based on grit selection) to laying down a fine, smooth finish prior to staining or painting. This sander is preferred when working with larger workpieces. The ¼ sheet sander’s overall dimensions are 4-1/2-inch x 5-1/2-inch.
Sandeck’s detail sander includes a detail finger attachment and detail contour attachment. The detail sander and sanding attachments are good for getting into those hard-to-reach areas such as corners in drawers and cabinets, between spindles on stairways and other confined areas to sand. The detail sander’s overall dimensions are 5-1/2-inch x 3-1/2-inch.
Sanding speeds are controlled with the Multi-Sander’s five, variable speed settings dial. Changing sanding pads from one attachment to the other is quick and easy. Sandeck’s innovative clamping system employs Hyperlock, which exerts one ton of clamping pressure to prevent sanding pad slippage.
Sawdust is funneled into a dust bag for a clean working environment. A vac adaptor is included to connect to a shop vacuum.
The Sandeck Multi Sander is powered by a 20V MAX Lithium 2.0 Ah battery. The Sander weighs 4.4 lbs. (with battery).
The 20V battery also has a built-in power gauge indicator. By pressing the indicator’s pad, it shows the battery’s current charge level. The 20V battery pack is part of the WORX Power Share program and compatible with other WORX DIY and lawn and garden tools.
The 5-in-1 Sandeck Multi-Sander includes one 20V MAX Lithium 2.0 Ah battery; 20V, 5-hour charger, dust bag, 5 in random orbit and ¼ sheet finishing and detail sander attachments. In addition, detail finger and detail contour attachments also are provided. There are 15 assorted sheets of sander also included as well as a storage bag.
What makes this Multi-Sander unique is its exclusive power transmission design with Mode Max Technology.
Mode Max Technology’s power transfer is specific to the sanding task at hand. Each pad has a unique interface designed to maximize efficiency, resulting in zero application compromise.
Typical multi sanders can lose performance in other modes. When the 5-inc random orbit sanding pad is attached, the sanding action makes small ellipses where no two orbits are the same during rotation, leaving a smooth, swirl-free finish. The multi-sander’s orbital diameter is 3/32 in.When switching to a ¼ sheet finishing sanding pad, the Multi-Sander ranges from 4000 to 10,000 orbits per minute (opm, no-load) for aggressive sanding (based on grit selection) to laying down a fine, smooth finish prior to staining or painting. This sander is preferred when working with larger workpieces. The ¼ sheet sander’s overall dimensions are 4-1/2-inch x 5-1/2-inch.
Sandeck’s detail sander includes a detail finger attachment and detail contour attachment. The detail sander and sanding attachments are good for getting into those hard-to-reach areas such as corners in drawers and cabinets, between spindles on stairways and other confined areas to sand. The detail sander’s overall dimensions are 5-1/2-inch x 3-1/2-inch.
Sanding speeds are controlled with the Multi-Sander’s five, variable speed settings dial. Changing sanding pads from one attachment to the other is quick and easy. Sandeck’s innovative clamping system employs Hyperlock, which exerts one ton of clamping pressure to prevent sanding pad slippage.
Sawdust is funneled into a dust bag for a clean working environment. A vac adaptor is included to connect to a shop vacuum.
The Sandeck Multi Sander is powered by a 20V MAX Lithium 2.0 Ah battery. The Sander weighs 4.4 lbs. (with battery).
The 20V battery also has a built-in power gauge indicator. By pressing the indicator’s pad, it shows the battery’s current charge level. The 20V battery pack is part of the WORX Power Share program and compatible with other WORX DIY and lawn and garden tools.
The 5-in-1 Sandeck Multi-Sander includes one 20V MAX Lithium 2.0 Ah battery; 20V, 5-hour charger, dust bag, 5 in random orbit and ¼ sheet finishing and detail sander attachments. In addition, detail finger and detail contour attachments also are provided. There are 15 assorted sheets of sander also included as well as a storage bag.
