News

Recall issued on sheet sanders

BY HBSDEALER Staff

The U.S. Consumer Product Safety Commission (CPSP), in cooperation with importer One World Technologies of Anderson, S.C., is recalling approximately 300,000 Ryobi 1/4th sheet sanders due to a risk of injury. 

Pieces of the fan can break off from the fan assembly and be ejected from the product, posing a laceration hazard to consumers, the CPSC announcement said. 

The firm has received 31 reports of broken fan pieces being ejected from the sander, including two reports of minor lacerations. 

The sanders, which were made in China, were sold from June 2005 to August 2010 through Home Depot, Gardner, Tap Enterprises, Direct Tools Factory Outlets, Amazon.com and ToolKing.com.

Consumers should immediately stop using the recalled sander and contact One World Technologies to receive a free replacement sander. More information on the recall is available at ryobitools.com

keyboard_arrow_downCOMMENTS

Leave a Reply

No comments found

TRENDING STORIES

POLLS

How much credit should be given to the co-op business model for the success of the independent hardware and building supply dealer over the last half century?
News

Sales rise at Central Garden & Pet

BY HBSDEALER Staff

Central Garden & Pet, a leading supplier of seeds, pottery, insecticides and other outdoor living products, reported net sales of $485.7 million for its second fiscal quarter, an increase of 10% over sales of $441.9 million in the same period a year ago. Strong net sales growth in its garden products segment contributed significantly to the overall increase, the company said. 

Net income for the quarter, which ended March 26, was $31.7 million, compared with $31.6 million in the corresponding period of 2010. The company reported operating income of $59.6 million, compared with operating income of $60.5 million in the comparable 2010 period, impacted by rising raw material input costs and the company’s continued strategic investments in marketing and brand building activities.

"Our revenues have continued to grow," said Bill Brown, chairman and CEO.  "We are especially pleased with the strong growth demonstrated by our garden business this quarter, led by our premium grass seed and our garden chemical and control products. Although our revenues grew again this quarter, our earnings were impacted by the continued rise in input costs and by our strategic investment in brand building, which enhances consumer awareness of the quality and benefits of our products." 

The garden products segment’s branded product sales increased $46.2 million, or 25%, to $231.3 million, and sales of other manufacturers’ products were $29.0 million, a decrease of $5.5 million compared with the second quarter of 2010. The pet products segment’s branded product sales were $186.0 million, an increase of $3.2 million, and sales of other manufacturers’ products were $39.4 million, relatively flat compared with the second quarter of 2010. 

Based in Walnut Creek, Calif., Central Garden & Pet is a supplier of lawn, garden and pet products under a variety of brands, including Pennington, Kaytee, Amdro, Sevin, Ironite, Norcal and New England Pottery. 

keyboard_arrow_downCOMMENTS

Leave a Reply

No comments found

TRENDING STORIES

POLLS

How much credit should be given to the co-op business model for the success of the independent hardware and building supply dealer over the last half century?
News

ErgoDig embraces ergonomic gardening

BY HBSDEALER Staff

ErgoDig announced the introduction of a comprehensive collection of ergonomic, ash wood-handled lawn and garden tools. 

Each of the 40 garden tools in the line features a wooden handle with an angle at a degree consistent with the human arm, the company said. 

“The concept for our new line of ergonomic garden tools derived from my own past experiences using conventional tools with straight handles,” said William Rogers, founder of ErgoDig. “I found that using straight-handled garden tools caused a certain level of physical pressure and tension on the arms.”

The angled-handle design has a patent pending based upon ergonomics to alleviate arm and wrist stress on the part of the user. It is the contoured shape of each handle that enhances the ability to grip the tool, decreases slippage and allows for ease-of-use. The company will be showcasing the new tool line at the National Hardware Show in Las Vegas, May 10 to 12, 2011. 

keyboard_arrow_downCOMMENTS

Leave a Reply

No comments found

TRENDING STORIES

POLLS

How much credit should be given to the co-op business model for the success of the independent hardware and building supply dealer over the last half century?