On the bubble
The standard, or spirit, level has been around since approximately 1640, when it was invented by French scientist Melchisedech Thevenot. The design was modernized in the 1920s, and since then not much has changed to the basic principal.
Still, today’s crop of level tools shows that progress marches on. In a market that offers everything from bubbles to lasers to digital readouts, consumers are reading more and demanding more from their tools.
To meet the increasing demand of consumers—and sometimes create it—manufacturers are beginning to offer products that are stronger, more durable, more accurate and offer a variety of proprietary innovations.
According to the Home Improvement Research Institute (HIRI), 3.8 percent of homeowners reported buying levels in 2005, just ahead of hammers at 3.3 percent and behind toolboxes at 4.0 percent. HIRI also reported that sales of spirit (or bubble) levels increased from 43 percent to 53 percent of levels purchased between 2003 and 2005, while laser levels dropped from 48 percent to 38 percent during the same time period.
Stanley’s response to level demand is its latest FatMax line of levels. For the New Britain, Conn., tool maker, the decision to stay with the spirit level was simple.
“We’ve done a lot of research with a lot of pros—they always go back to the standard level,” said Ryan Blair, Stanley’s global product line manager for layout tools.
Blair said that people expect more from manufacturers today. “The consumer’s getting a little more savvy, they want more quality for the price. They don’t want a disposable tool—they want something they can hang on to, something they can trust,” he said.
The latest addition to Stanley’s FatMax line features all the key elements of the new level equation. “We beefed up the product,” said Blair. “We made it thicker and taller.”
Part of the strength equation for Stanley was to build up the product’s endcaps, making them stronger and able to absorb greater impact.
Add that stronger construction to the FatMax’s accented dual side vials and center MaxEdge vial, a bridged center vial to allow for a continuous marking edge, and the readability of the level increases. The FatMax level is accurate within .0005 inches.
The folks at Stanley had a few other additions to the level. After talking to professionals and conducting numerous bench tests, there was one theme the company kept hearing over and over again. “People wanted a real nice big hand grip,” said Blair. Stanley added two. They also added a magnetic version to the level, building real earth magnets into it.
For leading level company Kapro, one of the latest innovations involves durability. The company introduced the Zeus 990, which is described by the Lake Mills, Wis.-based company as “the toughest level in the world.”
“It’s three to six times stronger than the average level currently on the market,” said Tom Kaczor, national sales manager for Kapro Tools.
According to Kaczor, the Zeus can withstand an inordinate amount of damage—the kind that comes from getting thrown around a job site—while still staying true to its factory calibration.
“On the spirit levels, they are demanding higher and higher accuracy on the vials,” said Kaczor, who pointed out that their vials also meet the .0005 mm/meter accuracy rating, which Kaczor equated to half the thickness of a dime per 6 feet.
In the readability category, Kapro has added multiple features to its latest creation to make reading a level line easier than ever before. It started with the plumb site dual view vials, which all ows the user to easily gain a vertical level view while looking straight on at the level, which Kapro says increases accurate reading and eliminates neck and eye strain. The company moved on to a magnified center vial and finished it off with an illumination feature (available on the 990 vision).
Kapro also added cushioned hand grips to the Zeus. In addition, the level is coated with “Keflon,” a non-stick material that Kapro hopes will attract concrete workers, who typically use wooden levels to which concrete won’t stick.
Montgomery Level from North Charleston, S.C., is a relatively new player, founded four years ago. But company president Matt Montgomery is confident his level can hold its own against the big level companies.
“It’s definitely obvious that the level industry is coming up with new and inventive ways to make the level more interesting,” said Montgomery.
The Montgomery level is no exception, offering its customers an unusual long, curved vial in the center of the tool, in addition to traditional vials. The curved vial serves to measure slope and pitch.
Montgomery, who was a roofing contractor prior to starting the company, wanted a tool to make measuring the pitch and slope of a roof easier and more accurate than the standard rise-over-run method.
“This is extremely accurate,” said Montgomery. “You put it on there, and it will tell you right away what the pitch and slope are.”
Montgomery also points to another marketing feature: green vial fluid, literally and figuratively, utilizing a water-based fluid in its vials, as opposed to the more common alcohol- or petroleum-based vials.
Montgomery admits there is one drawback to the water-based fluid. “With my fluid, the free zing point is minus 20 [degrees],” he said. “But in my opinion you really don’t need to be out there working in minus 20 degree weather.”
Weyerhaeuser reports loss in fourth quarter
Federal Way, Wash.-based Weyerhaeuser reported a net fourth-quarter loss of $63 million, swinging from earnings of $507 million in the same period last year. Sales were $3.9 billion, down 23.1 percent from $4.8 billion last year.
For the year, the forest products company had net earnings of $790 million, up 74.4 percent from $453 million in 2006. Sales dropped, however, to $16.3 billion from $18.7 billion last year, a decline of 12.8 percent.
Steven Rogel, chairman and CEO of Weyerhaeuser, characterized 2007 as a “challenging year” and said the company has been implementing ongoing improvements to its packaging business, while implementing “growth strategies” in its timberlands business.
“The continuing erosion of the U.S. housing market created very unfavorable market conditions for our timberlands, wood products and real estate businesses,” Rogel said. “Despite difficult market conditions, which we expect to continue through 2008, Weyerhaeuser remains focused on managing through the downturn.”
The company’s real estate business took the largest hit, with earnings falling 52 percent. Orders were down 19 percent, and the company’s backlog of homes sold, but not closed, dropped 35 percent.
Weyerhaeuser is one of North America’s largest diversified wood products companies.
NAR weighs in on Freddie Mac, Fannie Mae reform
The National Association of Realtors has submitted a position to the U.S. Senate Committee on Banking, Housing and Urban Development, supporting increased loan limits in government-sponsored enterprises (GSEs) Freddie Mac and Fannie Mae.
Reform to the two main government-sponsored lending organizations has been a topic of debate in light of the damaged subprime mortgage market.
Proponents of raising loan limits say it is a needed stimulus for the housing market. Opponents say giving the lending organizations a route to the “jumbo” loan market could be dangerous without additional safeguards.
Currently, a cap of $417,000 exists on loans issued by the GSEs. The NAR and other proponents of the stimulus plan support raising the GSE lending limit to $625,000.
The NAR submitted testimony to the HUD committee saying, “Fannie and Freddie are our partners in the housing industry and are important to stabilizing and strengthening the housing market.”
The group said the package could help “as many as” 500,000 jumbo loan borrowers to refinance. Additionally, the NAR says a higher rate limit could allow a large number of borrowers to enter the home buying market.